Air Compressor & Pneumatic Tool Rentals in CT and MA
When a paver breaker stalls out on a bridge deck in New Haven or a rock drill cannot keep pace on a utility job in Springfield, the whole crew is standing around waiting.
Able Tool stocks Chicago Pneumatic and Sullivan Palatek air compressors, along with demo tools, rock drills, and compactors built to keep pace with real crews. Every rental comes with real service and parts behind it.
Air power that shows up ready to run, with a team that answers when it counts.
Service and Parts on Every Rental
REQUEST MORE INFO
Contact us today to learn more about our services and products.
AIR COMPRESSORS
Air Compressors in South Windsor, CT & West Springfield, MA
Able Tool carries portable diesel air compressors from Chicago Pneumatic and Sullivan Palatek. The more tools you plan to run at once and the longer the job runs, the higher the output you need. The Chicago Pneumatic line ranges from the CPS 110 up through the CPS 400, and all of these units run Tier 4 Final Kubota diesel engines and come with an undercarriage and towbar for easy moves between sites.
CPS 110 Portable Compressor
Manufacturer: Chicago Pneumatic
Description:
The Chicago Pneumatic CPS 110 is a single-stage, oil-injected, rotary screw type air compressor, powered by a liquid- cooled, three-cylinder turbocharged Kubota diesel engine.
The unit hosts the new generation C67 Screw element in its air end combined with a Kubota made diesel engine model D902, complying with Tier 4 Final emission standard.
An undercarriage with fixed towbar and pintle eye is available as standard, combined with Department of Transportation approved road lighting.
Special attention has been given to the overall product quality, user-friendliness, ease of serviceability, and economical operation to ensure best in class cost of ownership.
CPS 185 Portable Compressor
Manufacturer: Chicago Pneumatic
Description:
The Chicago Pneumatic CPS 185 is a single-stage oil-injected rotary screw type air compressor, powered by a liquid-cooled, three cylinder diesel engine. The unit consists of an air end, diesel engine, cooling circuit, air/oil separation and control systems – all enclosed within a sound dampened Redrock™ polyethylene shell.
CPS 250 Portable Compressor
Manufacturer: Chicago Pneumatic
Description:
The CPS 250 portable air compressor is a single-stage, oil-injected, rotary screw unit. The operator can control the pressure using cognitive electronics (PACE) technology coupled with a XC2003 controller. Pressure can be adjusted in increments of 2 psi. It uses a 65-horsepower Tier 4-F Kubota diesel engine.
CPS 400 Portable Compressor
Manufacturer: Chicago Pneumatic
Description:
Up to 400 cfm // 150-200 psi // Approx. 4500 lbs. // PACE Technology // Final Tier 4
Sullivan Palatek Portable Diesel Compressors
Able Tool carries Sullivan Palatek portable diesel air compressors alongside Chicago Pneumatic, giving contractors a second brand to choose from when sizing a compressor to the job. Sullivan Palatek offers Tier 4 Final configurations across its engine-driven compressor lineup, which keeps emissions compliance simple no matter which size a job calls for.
With Sullivan Palatek and Chicago Pneumatic both on the yard, contractors have more ways to match a compressor to the job. Either brand supplies the air for paver breakers, rock drills, rammers, and other pneumatic tools, and the Able Tool team can help compare units by output, size, and job length before you commit.
DEMO TOOLS
Demo Tools in South Windsor, CT & West Springfield, MA
Chipping guns, paver breakers, and rivet busters from Chicago Pneumatic, built for demolition and plant maintenance work. Chipping guns like the CP4132 suit smaller, precise work. Paver breakers scale by weight class, from the 30 pound CP1210 for weight restricted areas up to the 90 pound CP1290 for heavy reinforced concrete. Rivet busters like the CP4611 handle metal and concrete demolition, including bridgework.
CP4132 Chipping Gun – Closed Handle
Manufacturer: Chicago Pneumatic
Description:
- “D” handle with inside trigger
- Standard retainer
- Strong and reliable
- Available in 3″ or 4″ cylinder stroke versions
CP4123 Chipping Gun – Open Handle
Manufacturer: Chicago Pneumatic
Description:
CP 4123 Chipping Hammer is lightweight and can be used as a concrete breaker that can be easily positioned to break vertical and overhead surfaces. This Chipping Hammer is a great tool for most small area works. It is also used for removing welding slag from a weld and welding spatter from alongside welds. It offers an open swan neck handle for better performance in tight spaces, these hammers allow operators to precisely chip away specific areas. Thanks to its high power and exclusive ergonomic features, this tool gets your productivity at the top, no matter how tough the conditions.
CP 1290 90lb Paver Breaker
Manufacturer: Chicago Pneumatic
Description:
The CHICAGO PNEUMATIC CP1290 90 Lb is Designed To Deliver The Power And Durability Necessary For A Variety Of Construction And Plant Maintenance Applications Such As Breaking Heavy Concrete, Reinforced Concrete, Frozen Ground, Macadam, Boulders And Pavement.
- Alloy Steel Forgings – Excellent Durability
- Four-Bolt Back Head – For Rugged Use
- Integral Oiler – Continuous Lubrication
- Heavy-Duty Front Head Springs – Reduce Reaction Back To Operator
- Reversible Piston – Reduces Maintenance Cost
- Improved Modern Design For Excellent Durability
- Air Inlet Swivel – For Easy Handling
CP 1260 60lb Paver Breaker
Manufacturer: Chicago Pneumatic
Description:
The CP1260 (60-pound class) demolition tool is engineered to deliver the power and durability necessary for a variety of construction and plant maintenance applications such as breaking heavy and reinforced concrete, frozen ground, asphalt, boulders and pavement.
- Alloy steel forgings provide excellent durability
- Four-bolt backhead design withstands rugged use Integral oiler provided continuous lubrication
- Heavy-duty front headsprings reduce reaction back to the operator
- Reversible piston reduced maintenance cost
- Air inlet swivel for easy maneuverability
CP 1210 30lb Paver Breaker
Manufacturer: Chicago Pneumatic
Description:
This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restrictions are in place such as ramps, bridge decks and some highway jobs.
CP 4611 11″ Rivet Buster
Manufacturer: Chicago Pneumatic
Description:
Features:
- Among the best power-to-weight ratios available
- Teasing throttle for precise control
- Rugged design and components for reliable
- Operation under tough conditions
- Stepped cylinder design for added safety
Applications:
- Used for removing rivets in metal and concrete applications, including demolition and bridgework
CP 4608 8″ Rivet Buster
Manufacturer: Chicago Pneumatic
Description:
Features:
- Among the best power-to-weight ratios available
- Teasing throttle for precise control
- Rugged design and components for reliable
- Operation under tough conditions
- Stepped cylinder design for added safety
Applications:
- Used for removing rivets in metal and concrete applications, including demolition and bridge work
ROCK DRILLS
Rock Drills in South Windsor, CT & West Springfield, MA
Chicago Pneumatic rock drills from a lightweight 9 pound CP9A up to a 60 pound CP69, for boring through rock, concrete, and other tough material. Lighter models offer better maneuverability for detail work. Heavier models deliver more power for bigger holes and tougher material.
9lb CP9A Pneumatic Rock Drill
Manufacturer: Chicago Pneumatic
Description:
- Excellent power-to-weight ratio helps drill holes faster and easier than comparable electric rotary hammers
- Built-in oiler provides continuous lubrication
- Teasing throttle for precise control
- Rotation release button converts tool to a hammer
- Cushioned piston for smooth operation, long life
- ‘Hushed Power’ muffler available to reduce noise
15lb CP22 Pneumatic Rock Drill
Manufacturer: Chicago Pneumatic
Description:
- Rubber Handle Grips
- Spring retainer to keep weight to aminimum
- Lightweight and powerful
- Low air consumption
- Combined blower and throttle lever for easy control
Options: Noise-reducing muffler
30lb CP32 Pneumatic Rock Drill
Manufacturer: Chicago Pneumatic
Description:
- 4 Drilling Speeds
- Replaceable Piston Stem Bearing
- Available Wet Or Dry
- Counter Clockwise Rotation
- Rubber Handle Grips
- Air Inlet Swivel: 3/4″
- Retainer Type: Latch
- Maximum Rotation Speed: 180 Per Minute
- Maximum Drill Depth: 118″ (9-3/4 Feet)
- Recommended Maximum Drilling Diameter: 2″
- Drill Rate: 9″ Per Minute
- Beavertail Latch Retainer
- Muffler/Silencer Available
60lb CP69 Pneumatic Rock Drill
Manufacturer: Chicago Pneumatic
Description:
- 1 ” X 4 1/4 ” shank
- Latch Style
- Rubber Grips
- Forged steel parts
- Recommended air pressure 90 PSI
COMPACTORS, POGO STICKS & RAMMERS
Compactors, Pogo Sticks & Rammers in South Windsor, CT & West Springfield, MA
Pneumatic tampers from Chicago Pneumatic and the AirRammer from MBW, built for compacting soil, sand, and gravel in tight spots a full size compactor cannot reach. The AirRammer runs entirely on compressed air, so there is no fuel, no spark plug, and no gas engine maintenance, plus lower vibration and quieter operation.
TAMPER CP 003
Manufacturer: Chicago Pneumatic
Model: CP 003
Description:
Weight 13,6 kg
Length 1320 mm
Body diameter 22 mm
Butt size 127 mm
Air consumption 8,4 l/s
Blows per minute 800 bpm
TAMPER CP 004
Manufacturer: Chicago Pneumatic
Model: CP 004
Description:
Weight 19 kg
Length 1270 mm
Body diameter 25 mm
Butt size 160 mm
Air consumption 13 l/s
Blows per minute 780 bpm
AirRammer MBW
Manufacturer: MBW
Description:
The Airammer™ is a pneumatically powered rammer. It eliminates a long list of engine related problems. There are no fuel or fuel mixing issues, no carburetor, no spark plug, no exhaust ports or muffler to foul with carbon, no rewind starter, no flooding problems, no air or fuel filters that can be plugged, no rpm issues, all of which affect performance.
The Airammer also offers the following advantages:
- It’s the safest rammer made. A deadman handle stops all ramming action instantly whenever the operator releases his grip on the guiding handle
- Very low hand/arm vibration, lower than any engine-powered rammer
- No sparks
- Is the quietest rammer in the marketplace
- The lack of exhaust fumes in bell holes and trenches is a health and safety issue for operations
The Last of a Dying Breed
Parts and Service, Not a Hold Queue
A compressor or breaker going quiet mid-job costs you the day. We stock parts for everything we rent and get you back up fast, not routed through a call center.
Locally Owned, No Approval Chain
Locally owned, and the team makes the call on pricing and terms directly. No corporate approval chain, no waiting on a regional manager.
A Fleet in Real Working Condition
Chicago Pneumatic Gear Most Yards Skip
Chicago Pneumatic demo tools, rock drills, and pneumatic rammers most yards do not stock and do not know how to service. We do both.
We Deliver Across Connecticut and Massachusetts
Two locations, one in South Windsor, CT and one in West Springfield, MA, keep air compressors and pneumatic tools close to job sites across Connecticut and western Massachusetts. Hartford, New Haven, and Fairfield counties see the heaviest demand, but we cover the full region.
Connecticut Counties:
Hartford County | New Haven County | Fairfield County | Tolland County | Middlesex County | New London County | Windham County | Litchfield County
CT Key Cities:
Massachusetts:
Air Compressor & Pneumatic Tool Rental FAQs
What size air compressor do I need?
It comes down to how many tools you are running and how demanding the job is. A single chipping gun needs a lot less air than a rock drill and a rivet buster running at the same time. For a short job, a smaller unit like the CPS 110 is plenty. For a longer build with heavy daily use, size up to the CPS 250 or CPS 400. We carry both Chicago Pneumatic and Sullivan Palatek compressors, so there are options to match the unit to your job. Not sure what fits your job? Call us and we will walk through it.
How do I choose between a Chicago Pneumatic and a Sullivan Palatek air compressor?
What is the difference between a chipping gun and a paver breaker?
Do you deliver air tools to job sites?
Yes. We deliver rental equipment to job sites across Connecticut and western Massachusetts from our locations in South Windsor, CT and West Springfield, MA. Call us to talk through delivery logistics and timing.
What happens if my compressor breaks down during the rental?
You call us. We carry parts for every machine in our rental fleet and our service team works fast to get you back on the job. You are not getting routed to a call center.
Do you offer flexible rental terms for contractors?
Can I rent air tools for a municipal or state contract job in Connecticut?
Yes! We work with town highway departments, public utilities, and contractors running jobs under state and municipal contracts throughout Connecticut. Check our State Contracts and Municipal Programs pages for details, or call us and we will talk through what your job requires.
What brands does Able Tool carry for air compressors and pneumatic tools?
Need Air Power on Your Next Job?
-
Phone: 860-289-2020 (Connecticut) | 413-363-0780 (Massachusetts)
-
Email: info@abletool.net
-
Able Tool & Equipment Rental Connecticut Address: 410 Burnham Street, South Windsor, CT 06074
-
Able Tool & Equipment Rental Massachusetts Address: 120 Interstate Dr. West Springfield, MA 01089